12.VW.2210.0440_BA_V03_EN
VAS 6558/11
9
EN | Product description
Symbols and connections
The following symbols are shown on the product:
Symbol
Meaning
General warning symbols
Electrical hazard!
Read the operating manual!
The serial number is used in conjunction with the manufacturer part number to identify
the product.
The manufacturer part number is used in conjunction with the serial number to identify
the product.
The product complies with protection class II, meaning it has increased or double
insulation between active and accessible parts in accordance with VDE 0100, Part
410/412.1.
The disposal instruction prohibits disposal of the product with household waste. Always
dispose of the product in accordance with all local disposal regulations.
The CE marking certifies that the product complies with all applicable European
regulations and has been subjected to the prescribed conformity assessment procedure.
The seal of approval identifies the product as having been approved for use in workshops
and production facilities belonging to the vehicle manufacturer.
The cMETus mark indicates that the product has been tested and certified by an NRTL in
accordance with applicable standards. The manufacturer is listed under the number
E114561 at the Eurofins testing labs.
Indicates that the product is intended for measurements up to a maximum of 1000 V in
accordance with IEC 61010-31.
