VOLKSWAGEN RCN210 RADIO INSTALLATION
On some VW models this radio can work straight after installation, but mostly it requires connection to INFO CAN lines those
could be reached, at the easiest, from A/C control panel unit. Without that connection, radio will run but will not work properly
or completely (no lighting, no power off after ignition off, no Bluetooth etc...) This manual describes and shows how radio needs
to be installed. The installation in manual is carried out on VW CADDY 2008. On other VW vehicles, installation proccess will be
analogical and similar.
Remove plastic trim around the radio and heating/ac control panel. Locate torx screws fastening the radio and a/c panel, loose
them to remove both parts.
Remove radio connector and antenna connector from original radio. Use supplied wiring adapter to connect RCN210 radio with
your original plug. Do not forget to plug antenna cable.