Customers in Europe, Asia, Australia, Africa,
Central and South America:
Please contact a Volkswagen dealership or
qualified workshop or register on the erWin
online portal (electronic repair and workshop
information):
Customers in North America and Canada:
To order printed service information please
contact:
Volkswagen Technical Literature Ordering
Center
You can also register online in the erWin in-
ternet portal:
Vehicles with special auxiliary equipment or
body parts
Auxiliary equipment and second stage manu-
facturers must ensure that the equipment
and bodies (conversions) adhere to the stipu-
lated environmental laws and regulations,
particularly the EU directive 2000/53/EC con-
cerning end-of-life vehicles and EU directive
2003/11/EC concerning the restriction on the
marketing and use of certain dangerous sub-
stances and preparations.
The vehicle owner must keep all assembly
documentation for these conversions and
pass it on to the scrapping company upon ve-
hicle handover if the vehicle is scrapped. This
is intended to facilitate environmentally re-
sponsible disposal for all vehicles, including
refitted vehicles.
Windscreen repairs
To function properly, some items of equip-
ment require an electrical or electronic mod-
ule, which is located on the inside of the
windscreen near the interior mirror. If the
windscreen has been damaged in the viewing
field of the electrical or electronic module,
e.g. by stone impact, the windscreen must be
replaced. Repairing the crack can lead to mal-
function or functional faults in the equip-
ment.
After changing the windscreen, the camera
and sensors must be adjusted and calibrated
by a qualified workshop.
Impairment or damage to sensors and cam-
eras
Incorrectly performed repairs, structural
changes to the vehicle, e.g. lowering the sus-
pension, retrofitted add-on parts or changes
to the trim can lead to sensors and cameras
being displaced or damaged. This can also be
caused by collisions when parking, or also
even by minor damage such as stone impacts
on the windscreen.
The area in front of and around the sensors
and cameras must not be covered by stickers,
additional headlights, trim frames for number
plates or similar. Observe the position of sen-
sors and cameras on the vehicle → page 7.
Failure to observe this may impair important
functions of driver assist systems and dam-
age the vehicle.
Repairs and structural modifications should
be carried out by a qualified workshop.
Further information:
— Repainting and paint touch-ups in the area
around the sensors may impair the func-
tion of the system in question.
— On some vehicle models, the Volkswagen
badge can impair the view of the radar
sensor in the front area. You should there-
fore operate the vehicle only with the
original Volkswagen badge or a badge ap-
proved by Volkswagen.
WARNING
Incorrect repairs and modifications can
cause functional problems and damage to
the vehicle and impair the effectiveness of
the driver assist systems. This can result in
accidents and severe injuries.
·
Have repairs and modifications to your
vehicle carried out only by a qualified
workshop.
Accessories, modifications, repairs and renewal of parts
363
11A012720AB
