37
Shower room lighting
The lighting in the shower room is switched on by a motion detector as soon as someone enters the room.
The switch-off takes place under time control approx. 35 seconds after the last motion detection.
The motion detector is located in the lower light. The upper light can be seen as an extension of the lower light
for technical purposes. Voltage is permanently present at the connector. As soon as the motion detector
switches through, all LEDs are supplied with voltage in parallel. There is a capacitor in the supply line of the lights
to prevent interference.
s599_042
s599_043
Interference suppression capacitor
Voltage supply
Motion sensors
Connecting section to the upper light
