Volkswagen Motorsport
Volkswagen Golf
GTI
TCR SEQ User Manual
Volkswagen Golf GTI TCR SEQ User Manual
Page 46
4.11
Brakes
To set-up the brakes, the following pumps can be used in both axles:
Master cylinder
Push Rod
Remarks
AP 15 MM
PRT 110
AP 15.9 MM
PRT 110
AP 16.8 MM
PRT 110
AP 17.8 MM
PRT 110
AP 19,1 MM
PRT 110
Car delivery front
AP 20,6 MM
PRT 110
AP 22,2 MM
PRT 110
Car delivery rear
AP 23,8 MM
PRT 110
-
It is not advisable to use more than two pump diameters difference between front and rear.
-
If the master cylinders are replaced, take care on the correct installation and functioning of the
brake balance bar. The following link shows how to assembly correctly:
https://tiltonracing.com/wp-content/uploads/2013/07/98-1250-600-Series-Balance-Bars.pdf
-
On the dashboard screen it is shown the front/rear pressure and the balance percentage. The
recommended percentage is 60% front (car delivery).
-
Brake balance channel:
P_BRK_FRONT
P_BRK P_BRK_REAR
To adjust the brake balance it is recommended to set first the rear brake proportioning valve on position 7,
where it is fully open, and to ensure that the hand brake is not locked. After that, set the desired balance
turning the yellow wheel on the main console. Remember not to press the brake pedal while turning the
wheel.
Set rear brake proportion valve on position on the desired position (standard position: 3)
∗
100
