Volkswagen Motorsport
Volkswagen Golf
GTI
TCR SEQ User Manual
Volkswagen Golf GTI TCR SEQ User Manual
Page 13
can only be selected with the car stopped following this process: red (+30) switch ON, yellow (+15)
switch OFF, keep Pit limiter/Starter button pushed and select the speed using the gear shift paddles.
The selected speed can be seen on the AIM MXG display.
-
Although it is possible to uncouple completely the steering wheel from the column with the engine
running, it is not advisable (causes fault messages on the OBD).
2.4 Display alarms and shift lights
Alarm
Problem
Info
Safety
LED 1
yellow
Low oil pressure
Check oil level
Continue
if no red light
appears
LED 1
green
-
Left turn light is active
-
LED 2
red
+ pop-up
Very low oil pressure
Big risk to break turbo or engine Slow down, drive to pitlane
or
stop in safe place
LED 3
purple
Low battery voltage
Check alternator and poly-V-
belt
Continue
LED 4
yellow
Low fuel pressure
Check fuel level
Continue
LED 5
yellow
High water temperature Keep an eye on the values
Continue
if no red light
appears
LED 5
green
-
Right turn light is active
-
LED 6
red
Too high water
temperature
Keep an eye on the values
Continue; torque
reductions will appear
LED 6
red
+ pop-up
Critical water
temperature
Big risk to break engine
Slow down, drive to pitlane
or
stop in safe place
LED 7
white
High gearbox oil
temperature
Drive out of slipstream, torque
reductions possible
Continue
LED 8
blue
High intake air
temperature
Drive out of slipstream, torque
reductions possible
Keep an eye on the values
and continue
LED 8
white
Steering initialization
needed
Turn steering wheel left and
right, alarm disappears
If alarm stays, problem in
electrical steering rack
LED 1 +LED 5
red
Pit limiter is active