VOGELS TriMotor VFWE 552 RC, Руководство по устранению неисправностей

Страница: 1 / 4

- 1 -
VFWE 552 RC - TriMotor™ troubleshooting
Troubleshooting, in case of a problem:
• Check if support is leveled.
• Check all power cable connections.
• Check if the infrared signal is unobstructed.
• Make sure to install IR before inserting power cable.
• Check the remote control battery.
• Check if a cable behind the TV is blocking the movement of the VFWE 552 RC.
• Make sure spring is adjusted to screen type.
• If unexpected movement occurs check if demo mode is turned off.
• Reset the VFWE 552 RC by disconnecting the power connector, wait 10 seconds and reconnect.
• Manually push the support against the wall and reset home placement with remote.
Remote control functions:
SetUp: When TriMotor is moved to wall press for 5 sec.
LED button: Lights up when a key is pressed. Also
used for extra functions (button combinations)
Swivel limit left: see picture 2
Swivel limit right: see picture 2
Tilt up. (in combination with LED button: move screen
forward from wall)
Tilt down. (in combination with LED button: move
screen back to wall)
Swivel right. (when pushed in combination with LED
button: stops demo movement)
Swivel right. (when pushed in combination with LED
button: starts demo movement)
Home button: move the TriMotor back to the wall
Memory 1: when the TriMotor is in a position you want
to save in memory press for 5 seconds. (when pressed
shortly TriMotor moves to Memory position 1)
Memory 2: when the TriMotor is in a position you want
to save in memory press for 5 seconds. (when pressed
shortly TriMotor moves to Memory position 2)