Club 8800
Quick Reference Setup Guide
This quick reference guide is provided to help you set up your
CLUB-
8800
system for the first time. It contains instructions on setting up
the products that are included in the
CLUB-8800
. If you are connect-
ing any additional gear that is not included in the
CLUB-8800
, refer to
the appropriate manuals for detailed instructions.
Gathering Package Contents
The first step to putting together your new CLUB system is unpacking all of the necessary equipment. Remember to keep
your manuals nearby when setting up, as you may need to reference them. The products listed below are included in the
CLUB-8800 system:
Mounting components into the CLUB-8800
Follow these basic guidelines when mounting:
• Always screw in the mounting screws using an
“X” formation.
• If possible, to keep the products cooler, leave some
space in between the components in the rack.
CDG 9000 PRO CONTROLLER
UHF 5800
VSP M1
KJ 7800 PRO
CDG 9000 PRO PLAYER
VP 2100
Below is one way to configure your CLUB-8800:
CDG-9000PRO
• (2) RCA cables
• (2) Control interface connector
wires
• (1) Instruction manual
KJM-7800PRO
• (1) Instruction manual
VP-2100PRO
• (1) Instruction manual
VX-15 Speakers
• (4) VX-15 speakers
UHF-5800
• (1) 3 ft. male/male ¼” cable
VSP-M1 Multi-Effect Digital Signal
Processor/Mixer
• (1) Instruction manual
SS-88 Speaker Stand
• (4) SS-88 speaker stands
Road Case
• (1) CLUB-8 road case
• (1) Rolling cart
• (2) MK 38PRO microphones
• (1) Gooseneck DJ light
• (1) Double RCA to ¼” cable (3’3”)
• Rack-mounting screws
On the web at
www.vocopro.com
or call toll free
1-800-678-5348
