# Preset
#
Preset
5 CLAVINET BC
21 RHODES SUITCASE WITH TREMOLO
6 CLAVINET BD
22 CLAVINET WITH AUTO WAH-WAH AND CHORUS
7 CLAVINET II
23* PIANET "A" WITH TREMOLO
8 RHODES STAGE
24* DX EP1 WITH CHORUS
9 RHODES SUITCASE
25* DX EP2 WITH CHORUS
10 RHODES NAIL POLISH 26* CLAVINET WITH WAH-WAH
11 HARPSICHORD 8'
27* RHODES STAGE WITH CHORUS
12 HARPSICHORD 8',4'
28* WURLITZER 200 WITH TREMOLO
13 PIANET "T"
29* HARPSICHORD 8',4' WITH AUTO
14 PIANET "A"
30* HARPSICHORD 8',4' WITH CHORUS
15 DX EP1
31* DX EP1 WITH TREMOLO
16 DX EP2
32* RMI WITH AUTO WAH-WAH
* not accessible from the front panel switch—use MIDI program change to access.
MIDI OMNI ON MODE
When the ELECTRIC PIANO is in MIDI OMNI ON mode, it will respond to all MIDI channels. Any
NOTE ON/NOTE OFF information (within the note range utilized by the ELECTRIC PIANO),
program changes (if the PRESET selector is set to
P
), and specified control changes regardless of
MIDI channel will be recognized by the ELECTRIC PIANO in this mode.
To enable MIDI OMNI ON mode set the MIDI Channel selector on the rear panel to the "0"
position.
MULTI-TIMBRAL MODE
Multi-timbral Mode allows the ELECTRIC PIANO to accept MIDI information received on three (3)
adjacent channels as determined by the basic channel selected on the rear panel MIDI channel
selector. Program changes may be sent to the ELECTRIC PIANO to allow different presets to play
on each of the three MIDI channels simultaneously. Effect control change commands are global,
affecting the sounds produced by all three channels.
To use Multi-timbral mode:
1. Set the preset selector on the front panel to
M
. By doing this you are now telling the ELECTRIC
PIANO to accept MIDI data on the three channels selected in next step.
2. Select the three adjacent channels to be enabled by first setting the MIDI channel selector to
the basic (first of the three consecutive) MIDI channel. The basic MIDI channel and the next two
higher channels will be enabled (recognized). If channel 15 is selected, channels 16 and 1 will
also be enabled. See the chart on the next page.
