manualshive.com logo in svg

VNS Therapy SENTIVA M2000 Wand, Техническое руководство

Поделиться
Скачать
VNS Therapy SENTIVA M2000 Wand Скачать руководство пользователя страница 35

35

Day/Night Programming

Use Day/Night Programming to deliver two independent therapy parameter 
schedules at diff erent times during a 24-hour period. In Day/Night 
Programming mode, the SenTiva M1000 will:

•  Deliver therapy according to two independent sets of parameters 
•  Deliver each therapy protocol at a specifi ed time during a 24-hour period

To enable Day/Night Programming:
1.

   Confi rm that the programmer date and time are correct

2.

   Tap on the 

EDIT PARAMETERS

 button, or tap on 

PARAMETERS

 in the 

      Navigation Bar at the bottom of the screen 

3.

  On the Parameters Screen, select

 ENABLE DAY/NIGHT

. 

       When asked “Do you want to create a Day/Night program,” tap 

YES

4.

   On the Nighttime Tab, follow the on-screen prompts to make selections for 

      active start and end times

5.

   On the Daytime Tab, the remaining hours from the 24-hour cycle are 

      automatically shown as the daytime active period. Customize stimulation    
      parameters as desired

6.

   On the 

DETECTION TAB

, set AutoStim thresholds for both day and night.

       Tap 

APPLY CHANGES

7.

   On the Apply Changes Screen, review the changes made and then tap 

       

CONFIRM

NOTE: 

Day/Night Programming is only available in Manual mode and is 
not available in Guided Programming mode. Guided Programming 
mode is unavailable if Day/Night Programming is enabled. Day/Night 
Programming can be disabled at any time.

NOTE: 

Time zone changes and Daylight Savings time changes must be 
programmed manually. The programmer does not automatically adjust 
for time changes. 

Содержание SENTIVA M2000 Wand


















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды