manualshive.com logo in svg

VNS Therapy SENTIVA M2000 Wand, Техническое руководство

Поделиться
Скачать
VNS Therapy SENTIVA M2000 Wand Скачать руководство пользователя страница 30

30

Guided Programming

To enable Guided Programming:
1.

   From the Summary Screen, tap on the 

EDIT PARAMETERS

 button, or tap on 

PARAMETERS

 in the Navigation Bar at the bottom of the screen

2.

   On the Parameters Screen, tap on 

SWITCH TO GUIDED MODE

 button 

       at top of screen

3.

   On the Switch to Guided Mode Screen, select 

STANDARD PROTOCOL

.   

       There is also an option of selecting a custom protocol 

4.

   On the Parameters Screen - Guided Mode View, follow the on-screen

       prompts to make selections. Tap 

APPLY CHANGES

 before leaving each screen

In Guided Programming mode, 
the SenTiva M1000 generator will:
 •  Keep the current mode, 
     protocol, and step in memory
 •  Increase or decrease 
     parameters to the next protocol 
     step in response to a single 
     button 

NOTE: 

Guided Programming mode is unavailable if Day/Night programming 
is enabled.

Use the Guided Programming feature to 
adjust parameters to the next step of a 
standard or custom protocol. This feature 
simplifi es programming by allowing you 
to increase or decrease parameters with 
a single button. You can exit Guided 
Programming at any time to adjust the 
parameters manually.

Содержание SENTIVA M2000 Wand


















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды