VMware GSX Server 3 Administration, Руководство администратора

Страница: 183 / 240

C H A P T E R 5 Moving and Sharing Virtual Machines
183
Sharing Virtual Machines
with Other Users
If you intend to have other users access your virtual machines, you should consider
the following points:
• On Windows hosts, the virtual machine files should be in a location on a system
that is accessible to those users. When you configure the virtual machine in the
New Virtual Machine Wizard, you can specify a location for the virtual machine
elsewhere on your system or on the network.
• On Linux hosts, permissions for the virtual machine files — especially the
configuration file (
.vmx
) and virtual disks (
.vmdk
) — should be set for other
users according to how you want them to use the virtual machine. For instance,
if you want users to run a virtual machine but not be able to modify its
configuration, do not make the configuration file writable.
• If your virtual machine was created under GSX Server 3 or another VMware
product (such as Workstation 4 or higher) and uses independent disks in
nonpersistent mode, consider changing the location of the redo-log file, since
by default it is placed in your TEMP directory, to which other users may not have
access. To change the location of the redo-log file, take the following steps.
a. With the virtual machine powered off, open the virtual machine settings
editor. Choose VM > Settings .
b. Click the Options tab.
c. Click Browse and select a directory that is shared with other users.
d. Click OK to save the change and close the virtual machine settings editor.
Note: GSX Server 2 virtual machines with disks in nonpersistent mode perform
better when the redo-log files for those disks are located in the system’s TEMP
directory.
• The virtual machine must be located in a directory with permissions set so that it
is accessible to all users of the virtual machine.
• The virtual machine must not be private. For more information, see Only You Can
See Virtual Machines You Create on page 116 .