Model airplanes, model engines, model engine fuel, propellers and related accessories, tools and equipment can be
hazardous if improperly used. Be cautious and follow all safety recommendations when using your VMAR model airplane.
Keep hands, tools, clothing and all foreign objects well clear of engines when they are operating. Take particular care to
safeguard and protect your eyes and fingers and the eyes and fingers of other persons who may be nearby. Use only a
good quality propeller that has no cracks or flaws. Stay clear of the propeller and stay clear of the plane of rotation defined
by the propeller.
The Manufacturer, Distributor, Retailer and/or other suppliers of this product expressly disclaim any warranties or repre-
sentations, either expressed or implied, including but not limited to implied warranties of fitness for the purposes of
achieving and sustaining remotely controlled flight.
In no event will the Manufacturer, Distributor, Retailer and/or other suppliers of this product have any obligation arising
from contract or tort, or for loss of revenue or profit, or for indirect, special, incidental, consequential or other damages
arising from the use of this product.
In purchasing and/or using this product, the user accepts all responsibility for its use and accepts all liability associated
with such use.
Proceeding with assembly and use of this product indicates
Agreement With and Acceptance of the Liability Disclaimer.
A Remote Control Model Aircraft is not a toy. It is a flying model that functions much like a full size airplane. If
you do not assemble and operate this product properly you can cause injury to yourself and others and
damage property. DO NOT FLY this model if you are not qualified.
You are ultimately responsible for the mechanical, aeronautical and electrical integrity of this model and it's
structure, control surfaces, hinges, linkages, covering, engine, radio, wiring, battery and all other components.
Check all components before and after each flight. Don't fly until it's right!
CAUTION
#VMA-S240X
TM
4
HINTS & TIPS cont'd
PLASTIC
T- NUT
BEVELLED
WASHER
METAL
BOLT
S240X_Important_Info_20041022.pmd
Copyright Richmond RC Supply Ltd
VMAR is a Trademark of VMAR Manufacturing Inc. and authorized VMAR Agents worldwide
TM
PLEASE READ EVERYTHING BEFORE ASSEMBLY!
PLEASE READ THIS BEFORE ASSEMBLY!
IMPORTANT INFORMATION
ABOUT VMAR STINGER
BLUE
GRAPHICS
#VMA-S240BF
#VMA-S240BTH
#VMA-S240BTV
#VMA-S240BVF
#VMA-S240BVW
#VMA-S240BVPS
#VMA-S240BVT
#VMA-S240BW
FUSELAGE
STABILIZER HORIZ
STABILIZER VERT
COVERING FUSE
COVERING WING
COVERING PATCHS
COVERING TAIL
WING SET
RED
GRAPHICS
#VMA-S240RF
#VMA-S240RTH
#VMA-S240RTV
#VMA-S240RVF
#VMA-S240RVW
#VMA-S240RVPS
#VMA-S240RVT
#VMA-S240RW
AFTER MARKET PARTS
COMMON PARTS
#VMA-S240XIB
#VMA-S240XIBP
#VMA-S240XMB
#VMA-S240XMGB
#VMA-S240XNGB
#VMA-S240XRMF
#VMA-S240XSPB
#VMA-S240XSPR
#VMA-S240XWPB
#VMA-CHSET
#VMA-WH2716
#VMA-WB1420
#VMA-MOUNTUNP
#VMA-SPIN225B
#VMA-TANK3503
#VMA-SXTRAY
FOR BLUE AND RED VERSION
INSTRUCTION BOOK
IMPORTANT INFORMATION SHEET
MASTER PARTS BAG
MAIN GEAR PARTS BAG
NOSE GEAR PARTS BAG
READ ME FIRST SHEET
SPARE PARTS BAG
WING SPAR JOINER
WING PARTS BAG
CONTROL HORN (2 SETS)
WHEELS 2-7/16" (NEED 3)
WING BOLTS (4)
ENGINE MOUNTS (PAIR)
SPINNER - BLACK 2-1/4"
FUEL TANK 350ml (12 OZ) 3 TUBES
SERVO TRAY - UNIVERSAL
SPARE PARTS
8.3
Mark the location of your engine lugs and the engine lug
mounting holes. Using a pen refill only without the pen holder
makes this easier. See Figure C.
8.4
Center punch the mounting hole locations & then drill 1/16"
pilot holes vertically through the engine mounts. Check that the
pilot holes are in the correct location and then expand the holes
with a 5/32" drill. See Figure D.
For more information that may be relevant to this model
please visit us at www.richmondrc.com/support.htm
8.5
Remove all the nuts and all the washers from the mounting
bolts. Insert the left bolts as shown in Figure E and the right
bolts as shown in Figure F.
8.6
Carefully turn the fuselage over while holding the bolts in place.
Install the washers & nuts as shown in Figure G. Tighten securely but
do not overtighten. Check periodically. Use Thread Locker if available.
8.7
Install your
Carburetor and
Muffler Securely
per FIgure H.
Follow up with
installation of
spinner and
appropriate
propeller for your
engine.
FIGURE C
FIGURE D
FIGURE E
FIGURE F
FIGURE G
FIGURE H
