Vmar AERO SUBARU Скачать руководство пользователя страница 1

Model airplanes, model engines, model engine fuel, propellers
and related accessories, tools and equipment can be haz-
ardous if improperly used. Be cautious and follow all safety
recommendations when using your VMAR model airplane.
Keep hands, tools, clothing and all foreign objects well clear of
engines when they are operating. Take particular care to safe-
guard and protect your eyes and fingers and the eyes and fin-
gers of other persons who may be nearby. Use only a good
quality propeller that has no cracks or flaws. Stay clear of the
propeller and stay clear of the plane of rotation defined by the
propeller. The Manufacturer, Distributor, Retailer and/or other

suppliers of this product expressly disclaim any warranties or
representations, either expressed or implied, including but not
limited to implied warranties of fitness for the purposes of
achieving and sustaining remotely controlled flight. In no event
will the Manufacturer, Distributor, Retailer and/or other suppli-
ers of this product have any obligation arising from contract or
tort, or for loss of revenue or profit, or for indirect, special, inci-
dental, consequential or other damages arising from the use of
this product. In purchasing and/or using this product, the user
accepts all responsibility for its use and accepts all liability
associated with such use.

A Remote Control Model Aircraft is not a toy. It is a flying
model that functions much like a full size airplane. If you
do not assemble and operate this product properly you
can cause injury to yourself and others and damage prop-
erty. DO NOT FLY this model if you are not qualified.
You are entirely responsible for the mechanical,

aeronautical and electrical integrity of this model and it's
structure, control surfaces, hinges, linkages, covering,
engine, radio, wiring, battery and all other components.
Check all components before and after each flight.

Don't fly until it's right!

The Graphics and Detailing are inside the POLYCOTE ECS!

Proceeding with assembly and use of this product indicates

Agreement With & Acceptance of the following Liability Disclaimer.

CAUTION

ASSEMBLY & OPERATIONS MANUAL

Please review this manual thoroughly before assembling or operating this model.

1

16

Notes

VMAR, POLYCOTE and VMAX are Trademarks of VMAR Manufacturing Inc. and appointed VMAR agents worldwide.

Copyright VMAR Manufacturing Inc - 20050902

Содержание AERO SUBARU

















Отзывы: