Vmac VR150, Руководство пользователя

Страница: 26 / 48

VMAC
–
Vehicle Mounted Air Compressors
Toll Free: 1-800-738-8622 Local: 1-250-740-3200
Fax: 1-250-740-3201
24
6. Close the air valve slowly to allow the system pressure to rise.
7. Once the system pressure is at maximum, slowly open the ball
valve on the test tool until the pressure is approximately 10 PSI /
68.95 KPA below maximum. Engine speed should start to ramp-
up at this point.
8.
Adjust the “Idle Down Pressure” up or down so that the engine
speed just starts to climb at approximately 10 PSI / 68.95 KPA
below maximum system pressure, The adjustment for idle-down
pressure must be turned clockwise to increase pressure or
counterclockwise to reduce pressure.
25 50 75 100 125 150 175 200
2500
2000
1500
1100
500
Factory setting, typically 1800 RPM
Factory setting, typically 140 psi / 965.3 kPa
Recommend 10 psi / 68.985 kPa below full pressure
175 psi / 1307 kPa maximum
Factory setting, typical 150 psi / 1034 kPa
Maximum RPM adjustment
Idle Down pressure adjustment
Regulator adjustment
(
(
)
)
Idle Down Pressure
Full Pressure