Vivotek AW-GEV-264A Series, Руководство пользователя

Страница: 265 / 334

User Manual rev. 1.2. Aug. 2015
265
4-12 MAC Table
Entries in the MAC Table are shown on this page. The MAC Table contains up to 8192 entries,
and is sorted first by VLAN ID, then by MAC address.
Web Interface
To Display MAC Address Table in the web interface:
1. Click Monitor, Dynamic MAC Table.
2. Specify the VLAN and MAC Address.
3. Display MAC Address Table.
Figure 4- 12: The MAC Address Table
Parameter description:
Navigating the MAC Table
Each page shows up to 999 entries from the MAC table, default being 20, selected through the
"entries per page" input field. When first visited, the web page will show the first 20 entries from
the beginning of the MAC Table. The first displayed will be the one with the lowest VLAN ID
and the lowest MAC address found in the MAC Table.
The "Start from MAC address" and "VLAN" input fields allow the user to select the starting
point in the MAC Table. Clicking the
“Refresh” button will update the displayed table starting
from that or the closest next MAC Table match. In addition, the two input fields will - upon a
“Refresh” button click - assume the value of the first displayed entry, allowing for continuous
refresh with the same start address.
The >> will use the last entry of the currently displayed VLAN/MAC address pairs as a basis
for the next lookup. When the end is reached the text "No more entries" is shown in the
displayed table. Use the l<< button to start over.
MAC Table Columns

Switch (stack only)
The stack unit where the entry is learned.

Type :
Indicates whether the entry is a static or a dynamic entry.

VLAN :
The VLAN ID of the entry.