Industrial 8xFE PoE + 2xCombo GbE
EXPoE Switch
100-240VAC
48-56VDC
INPUT
+ -
EX Mode
OFF
GbE
GbE
LINK/ACT
ON
9
10
LINK/ACT
1
3
5
7
9
9
2
4
6
8
10
10
PoE
LINK/ACT
PWR
DC input
VAC 100~240 power input
1. Install the PoE switch in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and dust.
2. Make sure the ventilation openings on the switch are not blocked.
3. Use CAT5 or 5e UTP/STP cables.
4. AC input (100~240V/AC, 50~60Hz), for a max. consumption of 250W.
IMPORTANT
:
INTRODUCTION
LED DEFINITIONS
CONNECTION
* 1x PoE switch
* 1x Quick Installation Guide
* 1x T25 L-wrench, 4x wall anchors
PACKAGE CONTENTS
Power
Orange ON
Power is on and normal.
Orange Off
Power is off.
Link/Act
Green ON
Ethernet port is connected.
Green Off
No connection.
Green blinking
Data is being transmitted or received.
GbE
Green ON
Link speed at 1000Mbps.
Green Off
Link speed at 10/100Mbps.
PoE
Orange ON
Port is linked to a powered device.
Orange Off
No device is connected.
Orange blinking Abnormal power supply is detected.
AW-FGT-103C-250
Quick Installation Guide
The AW-FGT-103C-250 is an 8 port 10/100BaseT PoE switch capable of feeding 15.4/30W (54V max. per port)
power to Power over Ethernet (PoE) devices. It comes with another 2x GbE combo ports. The switch is capable of a total
of 240 Watts PoE power budget.
Outdoor Unmanaged PoE Switch
Port LED1
Port LED2
EX MODE DIP SWITCH
EX ON
Ports 1 & 2 up to 250m PoE distance. When enabled, each port is isolated, but is linked to the uplink ports.
EX OFF
Normal communication for ports 1 ~ 5.
* EX mode in 802.3af (15.4W): camera connection up to 250m@10Mbps via EXPoE ports.
* EX mode in 802.3at (24W): camera connection up to 200m@10mbps via EXPoE ports.
Rev.: 1.1
