background image

Revison History:
 

Rev. 1.0: Initial release

 

Rev. 1.1: Added info. for EPoC application.

 

Rev. 1.2: Added surge protection connection.  

VIVOTEK Mounting Accessories

AM-713 Junction Box

Installation Guide

Mounting Dimensions

5.20

51.00

51.00

51.00

51.00

Installation

II

Compatible VIVOTEK Cameras

I

Compatible cameras/brackets

FD836B-HTV, FD836B-EHTV, FD836B-HVF2, FD836B-EHVF2, FD8382-TV, FD8382-ETV, FD8382-VF2, FD8382-EVF2, FD9381-HTV, 

FD9381-EHTV, FD9371-HTV, FD9371-EHTV

A 3/4" conduit is required for routing the cables with waterproof 

connection.  

Attach the included alignment sticker to a preferred position. Drill holes 

on the wall and install the junction box. If space behind the wall allows, 

you may also pass cables through the wall.   

Remove the top cover and unhook the tether wire.  

NOTE: If you have a POE extender or EPoC device, install them now. 

Refer to the later section for details.   

Install the cable gland and pass cables through it.   

Remove the dome cover and waterproof connectors.       

Pass cables through the center hole on the top cover. Secure the 

top cover by driving screws.    

Pass cables through the routing holes and install the camera to box by 

driving screws. 

Connect cables to the Ethernet port and terminal block.  

1

2

3

4

5

6

7

8

Secure the camera top cover. 

9

You can also install a PoE extender (AP-FXC-0200) to the box.   

Connect the PoE IN and PoE OUT cables.   

Put tags on the cables marking their intended use.    

PoE IN

PoE OUT

to another conduit 

box

PoE OUT

to camera

Open a live view console and adjust the shooting direction. Refer to the 

camera's QIG for more information.         

Part no.: 625031302G

Accessory Ordering part no.: 100138700G, AM-713_V01

EPoC junction box part no.: 100201400G

    

Package Contents

Optional Installation-1 

RG6 1.2km

AP-FEX-0106-T

EPoC Tx Module

AW-FCT-050A-250

PoE Switch

Indoor EPoC

RG6 1.2km

AP-FEX-0106-T

EPoC Tx Module

Attach a desiccant bag to the inside of the box. Note that the 

installation should be completed within 30 minutes so that 

desiccant remains effective.     

Отзывы: