Multi-function AV Distribution System
16
5. System Operation
5.1 IR Learning
The IR learning function allows user to use the buttons of control panel to displace
some keys of IR remote which can control display device or other devices. The control
panel has two buttons:
SOURCE
and
DISPLAY ON/OFF
, but the
SOURCE
button
does not support IR learning function, because it is designed for source selection.
Enter IR Learning Mode
Simultaneously press
SOURCE
and
DISPLAY ON/OFF
buttons to enter IR learning
mode. These two buttons will light up, and the
DISPLAY ON
and
DISPLAY OFF
LEDs
will start to flash.
Programming the DISPLAY ON and DISPLAY OFF Functions
1) Press
DISPLAY ON/OFF
button to choose DISPLAY ON or DISPLAY OFF
button function, and its corresponding LED will light blue. For example, press
DISPLAY ON/OFF
button to choose DISPLAY ON button function, and the
DISPLAY ON
LED lights blue.
2) Press the corresponding key (such as power on key) on IR remote; meanwhile,
put IR remote close to the IR sensor of control panel.
3) Once set up successfully, the
DISPLAY ON
LED will flash three times.
4) Repeat the above all three steps to set another
DISPLAY OFF
button function.
Exit IR Learning Mode
Press the
SOURCE
button to exit IR learning mode, and this button will go dark.
Apply IR Learning Function
Press the
DISPLAY ON/OFF
button on control panel to turn on display, and then press
this button again to turn off display device.
Note:
When the control panel is in the IR learning mode, press
SOURCE
button can exit.
If there is no operation for sixty seconds, the control panel will automatically exit the
IR learning mode.
All buttons will go dark while the control panel exits IR learning mode successfully.
