50
Image Problems
Problem: No image appears on the screen
Turn off all of the equipment and power up the equipment again in the correct order.
Problem: The image is blurred
1.
Adjust the focus on Qumi.
2.
Make sure Qumi-to-screen distance is within the specified range.
3. Clean Qumi lens with optical lens cleaning cloth if it is dirty.
Problem: The image is wider at the top or bottom (trapezoid effect)
1.
Position Qumi so that it is as perpendicular to the screen as possible.
2.
Adjust the Keystone settings in the OSD to correct the problem or set Auto Keystone
to On.
Problem: The image is reversed
Check the orientation of the Projector Mode setting in the Display menu in the OSD.
Problem: The image is flat with no contrast
Adjust the Contrast setting in the Color menu in the OSD.
Problem: The color of the projected image does not match the source image
Adjust the Color Temperature and Gamma settings in the Color menu in the OSD.
Remote Control Problems
Problem: Qumi does not respond to the remote control
1. Aim the remote control towards the remote sensor on Qumi.
2.
Make sure the path between remote and sensor is not obstructed.
3. Turn off any fluorescent lights in the room.
4.
Check to see if the battery polarity is correct.
5.
Replace the battery.
6.
Turn off other infrared-enabled devices in the vicinity.
7. Have the remote control serviced.
Содержание Qumi Q8
Страница 1: ......
Страница 62: ...56 Qumi Dimensions mm 7 4 mm mm 1 67 mm ...
