Vivitek DU8395Z, Руководство пользователя

Страница: 56 / 69

DU8395Z Series DLP Projector - User Manual
UM83950922EN01
56
Trigger
The projector is provided with a set of trigger output. User can connect the trigger to the screen with projector by the
cable. If user does so, once the projector is powered, the screen would be automatically turned on as well. There is a
2-3 second delay to activate this function. The selectable aspect ratios are as follows:
Off Turn off screen trigger
Screen Outputs 12V of power on Trigger for whichever aspect ratio
5:4
Outputs 12V of power on Trigger when Aspect Ratio is set to 5:4
4:3 Outputs 12V of power on Trigger when Aspect Ratio is set to 4:3.
16:10 Outputs 12V of power on Trigger when Aspect Ratio is set to 16:10.
16:9 Outputs 12V of power on Trigger when Aspect Ratio is set to 16:9.
1.88 Outputs 12V of power on Trigger when Aspect Ratio is set to 1.88.
2.35 Outputs 12V of power on Trigger when Aspect Ratio is set to 2.35.
Letterbox Outputs 12V of power on Trigger when Aspect Ratio is set to Letterbox.
Source Outputs 12V of power on Trigger when Aspect Ratio is set to Source
Native
Outputs 12V of power on Trigger when Aspect Ratio is set to Native.
OSD Settings
Menu Position Adjust menu position through this function, the available position options are at Top-Left,
Top-Right, Bottom-Left, Bottom-Right and center of the screen.
Menu Transparency Change the transparency of OSD Menu, the background color of the OSD can be adjust -
ed from darker to lighter if you want to display complete projected image.
Time Out Set up the timer to exit OSD menu, the available options are Always On, 10 Seconds, 30
Seconds and 60 Seconds.
Message Box This function allows you to disable the pop-up message at bottom-right of the screen.
Control Panel Lock Avoide someone accidentally pressing the control panel on the machine, causing the pro-
jector's various settings to be changed incorrectly. Refer to " page 29 ,Using the Control
Panel Lock " for detail message.
Security Lock
Avoide unauthorized personnel to operate the projector. Refer to " page 30 ,Using Securi-
ty Lock " for detail message.
Image Latency
Projector default is
Normal
. If the input image is simulated , gaming, such as Electric, Aircraft simulation, Military
training....etc. User can set this function
Fast
to get the quick response projection screen. Because the projector will
simplifie the image processing to reduce image frame delay. But if user feel the fast image latench make the image
quality too bad. User can set it to normal to retrieve the better image quality.