Vivitek DU8195Z страница 68 Скачать руководство пользователя | Manualshive

Страница: 68 / 69

background image

DU8195Z Series DLP Projector - User Manual

UM81950823EN02

68

Problem: The color of the projected image does not match the source image.

Adjust the Color temperature and Gamma settings on the PICTURE menu of the OSD

Projection Problems

Problem: There is no light from the projector

1.  Check that the power cable is securely connected.
2.  Ensure the power source is good by testing with another electrical device.
3.  Restart the projector in the correct order and check that the Power LED is green.
4.  Check if Blank or Shutter function is enabled

Remote Control Problems

Problem: The projector does not respond to the remote control.

1.  Direct the remote control towards remote sensor on the projector.
2.  Ensure the path between remote and sensor is not obstructed.
3.  Check the remote sensor on OSD is turned on. Refer to "Infrared Remote on page55 "
4.  Ensure remote control wire is not plugged in the projector.
5.  Turn off any fluorescent lights in the room.
6.  Check the battery polarity.
7.  Replace the batteries.
8.  Turn off other Infrared-enabled devices in the vicinity.
9.  Have the remote control serviced.
10. Ensure that the remote control code conforms to the projector’s code if universal remote control is used.
11. Check if Projector ID control is enabled and the ID number is correct. Refer to "Using Control ID for Multi-pro-

jector Application on page32 "

Projection Lens Problems

Problem: The Zoom or Focus adjustment cannot work.

1. Check if the lens is installed properly, improper lens installation may cause to lens cannot work normally.

Please follow the lens installation procedure to check again.

2. Check if Lens Lock function is enabled, locking the lens will disable all of lens adjustment functions. Perform

Center Lens function to calibrate the Lens again.

3. Replace the other lens to check the problem if the lens is available.
4. Contact with service center for the details.

Remote communication Problems

Problem: The projector does not respond to Ethernet control

1. Make sure Network Standby is turned on, the communication path is interrupted if it’s turned off(less 0.5W).

Refer to "Projection Mode on page53 ".

2. Check the network configuration in your laptop and projector; refer to Remote Communication manual for

more information.

Having the Projector Serviced

If you are unable to solve the problem, you should have the projector serviced. Pack the projector in the original

carton. Include a description of the problem and a checklist of the steps you took when trying to fix the problem. The

information may be useful to the service personnel. Return the projector to the place you purchased it.

«
...
66
67
68
69
»

Содержание DU8195Z






































































Отзывы:

Нет отзывов

Похожие инструкции для DU8195Z

Бренд: Panamax Страницы: 4

EcoBright ZW210ST

Бренд: Optoma Страницы: 2

Бренд: Eiki Страницы: 79

Innovative Technology XT50

Бренд: Eaton Страницы: 8

OutStanding Screens OSS Drive-in 16

Бренд: LAWSON PHILIPS Страницы: 2

Бренд: Skyline Exhibits Страницы: 21

Бренд: Liesegang Страницы: 58

Бренд: Optoma Страницы: 67

Бренд: Tripp Lite Страницы: 12

MEDALLION WS-55615

Бренд: Mitsubishi Страницы: 81

Tauten Tab Tension Screen

Бренд: Cirrus Страницы: 7

Бренд: Panasonic Страницы: 5

Бренд: Panasonic Страницы: 5

Бренд: Panasonic Страницы: 5

Бренд: Panasonic Страницы: 34

Бренд: Panasonic Страницы: 60

Бренд: Panasonic Страницы: 66

Бренд: Panasonic Страницы: 68

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды