Vivitek DU8195Z, Руководство пользователя

Страница: 52 / 69

DU8195Z Series DLP Projector - User Manual
UM81950823EN02
52
Edge Blend
Edge Blend function requires multiple projectors to simultaneously project on the same screen. Use this function to
adjust the uniformity of image. To use this function, Edge Blending must be enabled on both projectors. The functions
as follows can be only adjusted when Edge Blend is turned on.
Edge Blend
If the user would like to function Edge Blend, turn this function to On.
Align Pattern If user turns this function to On, the projector will show pattern for user to adjust the over-
lapping part of projection
White Level White Level is used to set the overlapped area for blending in multi-projection application,
the overlapping When projecting White, the area where the two images overlap is project-
ed twice the projectors’ white output levels. The solution is to adjust the White Level. First
make sure that the units connected to the projectors are outputting black. Then increase
the White Level (Top, Bottom, Left, and Right) until the non-overlap area’s brightness
matches the overlap area.
Black Level The purpose of Black Level is to increase the black level of non-overlapping area. When
projecting black, the area where the two images overlap projects twice the projectors’
black output levels. The solution is to adjust the Black Level. First make sure that the
units connected to the projectors are outputting black. Then increase the Black Level
(Top, Bottom, Left, and Right) until the non-overlap area’s brightness matches the overlap
area.
Reset All the settings toward edge blend will set to default.
Screen Format
Sleet the screen format to 16:10 / 16:9 / 4:3.