Vivitek DU8195Z, Руководство пользователя

Страница: 46 / 69

DU8195Z Series DLP Projector - User Manual
UM81950823EN02
46
Eye Swap If the 3D image transmitted to the 3D glasses is reverse, you can set the Eye Swap to “Re-
verse” to normalize the image. Otherwise, keeping mode of “Normal” would be suggested.
DLP Link
This function is to activate or deactivate the DLP Link sync.
Dark Time
Manually switch the Dark time for glasses tolerance, the available options are 0.65ms,
1.3ms and 1.95ms.
Sync Delay If the 3D display shutter switch time of different brand 3D product is not synchronized
with the projector, it will cause ghosting or poor 3D effect. Please adjust the sync delay to
synchronize the 3D machine shutter and the projector shutter switching time for the best
3D projection.
Sync Reference The projector provides DLP Link and 3D IR sync for 3D display, you can specify the built-
in DLP Link or external 3D IR transmitter to synchronize the signal of the 3D glasses,
or select Auto to set the sync signal depended on the 3D format and if external 3D sync
device is connected. This function is only applied to the condition that 3D Format is Frame
Sequential or external 3D sync device is connected to the projector.
External : Signal is sent from external 3D sync signal receiver.
Internal : Signal is sent by the projector, 3D sync signal is DLP Link.
Auto : Projector select 3D sync signal depended on the 3D format and if the extend 3D
sync device is connected.
Important reminders
People with the following conditions should view 3D image with great care:
• Children under six years in age.
• People who are allergic to light, unhealthy and have the history of cardiovascular diseases.
• People who are tired or lack of sleep.
• People who are under the impact of drug or alcohol.
•
Normally, it is safe to watch 3D images. However, some people might feel uncomfortable.
• Refer to the guidelines revised and released by the 3D League on December 10, 2008 who match 3D images
need to take a break for at least 5 to 15 minutes every thirty minutes or one hour.
Auto Sync
You can use this function to execute signal source auto synchronization.