Vivitek DU8190Z Скачать руководство пользователя

Страница: 4 / 58

DU8190Z DLP Projector - User Manual

UM81900217EN00

Copyright

The User's Manual (including all pictures, illustrations and software) is protected by the international copyright right

law. All rights are reserved. No duplication of the manual or any content included in the manual is allowed without the

written consent of the manufacturer.

Disclaimer

The information in the manual is subject to change without notice. The manufacturer does not provide any statement

or warranty of the contents in the manual and clearly give up the implied warranties of merchantability and of fitness

for a particular purpose. The manufacturer reserves the rights to modify the publication and change the contents of

the materials at any time without notice to any person.

About the Manual

The manual describes how to install and use the projector and is applicable to the end-user. Relevant information

(such as illustrations and descriptions) is put on the same page as possible as we can. The format, easy for printing,

is convenient for reading and paper-saving which is beneficial to environmental protection. It is suggested printing

the page you need.

Содержание DU8190Z



























































Результаты поиска

Содержание DU8190Z

Отзывы:

Похожие инструкции для DU8190Z

Бренды по названию

Популярные бренды

Vivitek DU8190Z, Руководство пользователя

Результаты поиска

Содержание DU8190Z

Отзывы:

Похожие инструкции для DU8190Z

Бренды по названию

Популярные бренды