Vivitek DS230 страница 33 Скачать руководство пользователя

Страница: 33 / 44

Replacing the Lamp

As the projector operates over time, the brightness of the projector lamp gradually
decreases and the lamp becomes more susceptible to breakage. We recommend
replacing the lamp if a warning message is displayed. Do not attempt to replace the
lamp yourself. Contact the qualified service personnel for replacement.

Note

•

The lamp is extremely hot right after turning off the projector. If you touch the lamp, you

may scald your finger. When you replace the lamp, wait for at least 45 minutes for the

lamp to cool down.

•

Do not touch the lamp glass at any time. The lamp may explode due to improper

handling, including the touching of the lamp glass.

•

Lamp lifetime may differ from lamp to lamp and according to the environment of use.

There is no guarantee of the same lifetime for each lamp. Some lamps may fail or

terminate their lifetime in a shorter period of time than other similar lamps.

•

A lamp may explode as a result of vibration, shock or degradation as a result of hours of

use as its lifetime draws to an end. Risk of explosion may differ according to the

environment or conditions in which the projector and lamp are being used.

•

Wear protective gloves and eyeglasses when fixing or detaching the lamp.

•

Faster on-off-cycles will damage the lamp and reduce lamp life. Wait at least for 5

minutes to turn off the projector after powering on.

•

Do not operate the lamp in proximity to paper, cloth, or other combustible material nor

cover it with such materials.

•

Do not operate the lamp in an atmosphere containing an inflammable substance, such

as thinner.

•

Thoroughly ventilate the area or the room when operating the lamp in an oxygen

atmosphere (in the air). If ozone is inhaled, it could cause headaches, nausea, dizziness,

and other symptoms.

•

The inorganic mercury is involved in the lamp. If the lamp bursts, the mercury inside the

lamp will be exposed. Leave the area immediately if the lamp shatters while being

operated and ventilate the area for at least 30 minutes in order to avoid the inhalation of

mercury fumes. Otherwise it could be harmful to user’s health.

Содержание DS230













































Результаты поиска

Содержание DS230

Отзывы:

Похожие инструкции для DS230

Бренды по названию

Популярные бренды

Vivitek DS230, Руководство пользователя

Результаты поиска

Содержание DS230

Отзывы:

Похожие инструкции для DS230

Бренды по названию

Популярные бренды