Vivitek DK10000Z страница 48 Скачать руководство пользователя

Страница: 48 / 62

DK10000Z Series DLP Projector - User Manual

UM100000823EN03

Standby Mode

Saving

standby power consumption less than 0.5W, Ethernet control function is not workable.

ECO

standby power consumption less than 3.0W, Ethernet control function is workable but

HDBaseT is not available.

Normal

standby power condusmption less than 6.0W; HDBaseT only can work at this condition.

Note

No matter which mode selected. The keypad on projector, RS-232 and infrared remote control can be used.

Auto Power Off

This function is set to OFF by default. When it is set to ON and no input signal is received within 20 minutes, the pro-

jector will turn off automatically.

Auto Power On

This function is set to OFF by default. When it is set to ON, the projector will turn on automatically when y AC power

is turned on next time ( press the power switch on the projector to turn it on automatically, instead of using the remote

control or the machine keypad button ). Set this function to OFF if it’s unnecessary.

Network

Use this function to configurator the network settings so that you can control the projector via the network.
Press ▲▼ and Enter button to select Network and network settings. Please refer to Remote Communication Manual

for further information.

DHCP

Set DHCP to ON/OFF. When DHCP is set to ON, the DHCP server of the domain will as-

sign an IP address to the projector. The IP address will appear on the IP address window

without need to make any input. If the domain cannot assign any IP address, 0.0.0.0 will

be shown on the IP address window.

IP Address

To specify an IP address, press the Enter button to show the IP address input window.

Use the ◄► button to select the number in the address to change. Use the ▲▼ button

to increase or decrease the number in the IP address. Network IP Address 172. xxx. xxx.

xxx.

Subnet Mask

Set the subnet mask. The input method is the same as the setting for IP address.

Gateway

Set the gateway. The input method is the same as the setting for IP address.

DNS

Set the DNS. The input method is the same as the setting for IP address.

MAC Address

Show projector’s MAC Address.

Содержание DK10000Z































































Результаты поиска

Содержание DK10000Z

Отзывы:

Похожие инструкции для DK10000Z

Бренды по названию

Популярные бренды

Vivitek DK10000Z, Руководство пользователя

Результаты поиска

Содержание DK10000Z

Отзывы:

Похожие инструкции для DK10000Z

Бренды по названию

Популярные бренды