Vivitek DK10000Z страница 4 Скачать руководство пользователя

Страница: 4 / 62

DK10000Z Series DLP Projector - User Manual

UM100000823EN03

Copyright

The User’s Manual (including all pictures, illustrations and software) is protected by the international copyright right

law. All rights are reserved. No duplication of the manual or any content included in the manual is allowed without the

written consent of the manufacturer.
Vivitek is the trademark of Vivitek Corporation. ©All rights reserved. 2019.

Disclaimer

The information in the manual is subject to change without notice. The manufacturer does not provide any statement

or warranty of the contents in the manual and clearly give up the implied warranties of merchantability and of fitness

for a particular purpose. The manufacturer reserves the rights to modify the publication and change the contents of

the materials at any time without notice to any person.

About the Manual

The manual describes how to install and use the projector and is applicable to the end-user. Relevant information

(such as illustrations and descriptions) is put on the same page as possible as we can. The format, easy for printing,

is convenient for reading and paper-saving which is beneficial to environmental protection. It is suggested printing the

page you need.

Содержание DK10000Z































































Результаты поиска

Содержание DK10000Z

Отзывы:

Похожие инструкции для DK10000Z

Бренды по названию

Популярные бренды

Vivitek DK10000Z, Руководство пользователя

Результаты поиска

Содержание DK10000Z

Отзывы:

Похожие инструкции для DK10000Z

Бренды по названию

Популярные бренды