39
DLP Projector - User’s Manual
OSD Introduction - CONTROL
INPUT
PICTURE
Eco Network Power
Auto Power Off
Auto Power On
Projector Control
Network
Start Up Logo
Trigger
Auto Search
Dynamic Black
Language
< Eco >
< On >
< Off >
< ----- >
Enter
< On >
< Auto >
< Off >
< On >
Enter
LAMPS
ALIGNMENT
CONTROL
SERVICE
y
Eco Network Power
Use
function to set Standard or Eco network power.
y
Auto Power Off
The default value is
OFF
. If you set it to
ON
, the projector will automatically shut down after 20 minutes without
input signal.
y
Auto Power On
The default value is
Off
. If you set it to
ON
, the projector will automatically start up when it is connected to AC
power. If you plug the projector’s power cord into an AC socket with a switch, you can use this function to start up
the projector using the socket’s switch instead of the remote. If you do not need this function, please set it to
Off
.
y
Projector Control
Use
function to select RS232 or Network for the projector control.
y
Network
Use this function to setup the network configuration.
