4
Initial Camera Setup
When powering the camera ON for the first time the camera will take you through the INITIAL
CAMERA SETUP.
Powering the Camera ON
1)
Batteries
Make sure the batteries have been inserted properly into your digital camera. Use 3 AAA
(1.5v) batteries. Alkaline batteries are recommended. (Batteries not included.)
Slide the battery compartment open on the bottom of the camera.
Insert the batteries in accordance with the polarity indicated on the inside of the battery
compartment.
Shut and slide the battery cover until closed.
Note:
Remove the batteries from the camera when not in use for an extended period.
Do not mix alkaline and non-alkaline batteries.
There are a few features that will not work if the battery power level is low.
When the battery power is low the battery icon turns red and the camera will
automatically turn off a few seconds later.
The energy status of the power is displayed on LCD as below:
Full battery power
Medium battery power
Low battery power