5
When powering the camera ON for the first time the camera will take you through the INITIAL
CAMERA SETUP.
Powering the Camera ON
1)
Battery
Make sure the battery it is fully charged before the first use.
To charge your battery, follow one of the steps below:
A. Insert the battery according to the correct polarity.
Make sure to insert the lithium battery all the way into the battery compartment.
The battery latch should cover the battery when inserted correctly.
B. Charge the battery using the USB connection cable (included).
- Connect one end of the USB connection cable into the USB port on your camera.
- Connect the other end of the USB cable to the USB port on your computer.
- The charge light will turn off when the battery is fully charged.
