15
2.6 C
ONNECTING
T
HE
V
ARIOUS
S
YSTEM
C
OMPONENTS
1
Once cabling issues have been dealt with the various system connections
need to be made.
2
Connect an IEC Power lead to the back of the ViVid.
3
Connect the audio inputs and outputs to the XLR connectors on the rear
of the unit.
4
Connect the video source signal to VIDEO IN using either the composite
BNC Input, or the Y/C Input connector.
5
Connect a cable from the Video Out or Y/C Out Connector to an external
picture monitor.
6
To lock the ViVid to an external video reference, connect the source to the
REF IN Port.
7
To allow an external timecode to be used with the ViVid, connect a time
code source to the LTC In Port.
8
Connect a 9-Pin control cable from an external device to the ViVid via the
Sony 9- pin Port.
1. If terminator switches are fitted to your unit, they must be switched to the on position if
there are no other video devices connected to the Video Loop thru connector.
2. If there is no termination switches fitted, you must connect the terminators supplied to the
video loop through if there are no devices to be connected to these sockets.