Vivax ACP-09CH25AEMI, Руководство пользователя, Страница: 211 / 244

VIVAX ENG
Handling the remote controller
Location of the remote controller
.
Use the remote controller within a distance of 8 meters
from the appliance, pointing it towards the receiver.
Reception is confirmed by a beep.
Using the remote controller holder(optional)

The remote controller can be attached to a wall or
pillar by using a remote controller holder (not
supplied, purchased separately).

Before installing the remote controller, check that
the air conditioner receives the signals properly.

Install the remote controller with two screws.

For installing or removing the remote controller,
move it up or down in the holder.
CAUTIONS

The air conditioner will not operate if curtains,
doors or other materials block the signals from the
remote controller to the indoor unit.

Prevent any liquid from falling into the remote
controller. Do not expose the remote controller to
direct sunlight or heat.

If the infrared signal receiver on the indoor unit is
exposed to direct sunlight, the air conditioner may
not function properly. Use curtains to prevent the
sunlight from falling on the receiver.

If other electrical appliances react to the remote
controller, either move these appliances or consult
your local dealer.

Do not drop the remote controller. Handle with
care. Do not place heavy objects on the remote
controller, or step on it.
8m