DP 2310 Wi-Fi Switch System
Guide
Created on 12/3/2002 11:45 AM
4.1.2.7
Bore Site Notch
The Bore Site Notch feature is intended to test the antenna pattern of the Wi-Fi Switch. This will set
alternate phases per element creating phase cancellation in the bore sight (perpendicular) direction.
4.1.2.8
Vector Modulator (VM) Settings to -5/-48
This function sets the switch to the ‘known’ state of -5 dBm power and -48 degrees.
4.1.2.9
DAC Status
Clicking this button displays the DAC Status screen described in the next section.
4.1.2.10
Radio Status
Clicking this button displays the Radio Status screen described in a later section.
4.1.3
DAC Status
The DAC Status page provides another way of viewing and changing the data found in the DAC portion
of the Main Control Page. The data is organized by DAC (A thru C) and DAC channel (0 through 15).
Figure 3 DAC Status Page
1
2
3
4
5
