Long Reach Footcare Pro
H124
v01: 26/08/20
Please read and retain these instructions for future reference
Dimensions
27.5 x15.5 x5.5cm
EASILY REACH YOUR TOES AND FEET
SAVE MONEY ON SALON PEDICURES BY
DOING SO AT HOME
BATTERY OPERATED 2x AA REQUIRED
10 HEADS / FILES INCLUDED
EASILY TRIM, SHAPE, BUFF AND POLISH.
FOOT CANE ALSO REMOVES CALLUSES
REACHES TOENAILS AND HEELS NO NEED TO
BEND OVER. MAKES YOUR FEET NICE AND
SMOOTH
Before using the Footcare Pro
The Footcare Pro is powered by 2x AA batteries (not included). For the best
results, use alkaline batteries. To insert new batteries, simply unscrew the
blue battery door on the rear of the unit as shown in Figure #1.
Now insert the batteries as shown in Figure #2. To close the unit, screw the
battery door back on securely.
Attaching and Removing the Attachment Heads
To attach a Footcare Pro attachment head, gently press the shaft of the
head into the hole on the nose of the Footcare Pro until it feels secure.
(Figure #3). Do not force the head or use any tools, this may cause damage
to both the head and the Footcare Pro. To remove the head, gently slide the
shaft out of the unit. Again, do not use any tools and take are not to
accidentally press the ON button while attaching or removing a head.
Turning the unit ON and OFF
Simply press the button on the Footcare Pro handle and it will stay on as
long as it is pressed. To shut off the unit, simply let go of the button and the
Footcare Pro will stop. Always check to make sure that the attached head is
secure, and never start the Footcare Pro if an attached head feels loose or
looks worn.
