VCI10-BH
BLUETOOTH
®
HART
®
COMMUNICATION INTERFACE INSTALATION, OPERATION AND CONFIGURATION MANUAL
______________________________________________________________________________________________________________________________
19
9
VMT-HART
VMT-HART
(
Vivace Mobile Tool HART
) is a versatile configurator for HART
®
devices on
Android
™
plattform which integrates
Vivace Process Instruments
application family.
Working with VCI10-BH interface, it provides a complete solution for accessing and managing
HART
®
field devices. It allows configuration, calibration, maintenance and monitoring variables from nay
HART
®
device.
VMT-HART uses information described on device DDL file (
Device Description Language
) to
determine the content to be shown on each screen, which variables can be edited, which procedures must
be followed for execute calibration, setup or maintenance.
Before using VMT-HART it is necessary to pair VCI10-BH interface on the A
ndroid
™ device. Enter
the Bluetooth configuration screen on A
ndroid
™, activate Bluetooth function and, after finding VCI10-BH,
click on it to start pairing. A random key will be generated. The Bluetooth identification for VCI10-BH is
composed by
“BH-” + Interface Code. This code is located on the back side of batteries cover. Once the
interface is paired, this procedure will not be necessary again.
On VMT-HART, check if the configured interface is the VCI10-BH (Bluetooth) and enter the
interface code.
“Interface” option will be found on pop-up menu of VMT-HART initial screen.
Figure 9.1
– VMT-HART: communication interface.
After that, it will be necessary to activate VMT-HART license. Enter option
“License” on
pop-up
menu of VMT-HART initial screen (Figure 6.1) and send to
Vivace Process Instruments
via e-mail
([email protected]) “Code 1” and “Code 2” in order to receive the register key.