VITRIKO
Mobile Data Experts
1. CONFIGURATION OVER WEB BROWSER
1.28
SMTP configuration
To enter the
SMTP
it is possible configure SMTP (Simple Mail Transfer Protocol) client,
which is set by sending emails.
Item
Description
SMTP Server Address
IP or domain address of the mail server.
Username
Name to email account.
Password
Password to email account.
Own Email Address
Address of the sender.
Table 58: SMTP client configuration
Mobile operator can block other SMTP servers, then you can use only the SMTP server of
operator.
Example settings SMTP client:
Figure 52: SMTP configuration
E-mail can be send from the Startup script. This command is used to email with following
parameters.
•
-t receiver Email address
•
-s subject
•
-m message
•
-a appendix
•
-r number of attempts to send email (default set 2 attempts)
Commands and parameters can be entered only in lowercase.
Example to send email:
email –t [email protected] –s "subject" –m "message" –a c:
\
directory
\
abc.doc –r 5
This command sends e-mail to address
with the subject
"subject"
, body
message
"message"
and annex
"abc.doc"
right from the directory c:
\
directory
\
and 5 attempts
to send.
71
Contact www.vitriko.com [email protected]