VITO PRO-POWER VISCME210, Инструкция по эксплуатации

Страница: 36 / 52

36
FREQUENTLY ASKED QUESTIONS/ TROUBLESHOOTING
Question/Problem - Cause
Cause
Solution
The power tool does not switch on:
•
The power cord is unplugged or there is an
electrical breakdown;
•
The extension cord is too long or the cross-section
of the wire is too thin;
•
The supply voltage is too low;
•
Motor overheating;
•
Check the plug, socket and circuit breaker;
•
Remove or replace the extension cord;
Plug the power cord directly into the socket;
•
Check that the supply voltage is adequate;
•
Let the power tool cool for 2 minutes and then turn
it back on;
Excessive vibrations:
•
Loose bolts or parts;
•
The saw blade is not installed correctly;
•
The workpiece dimensions are larger than the
appliance cutting capacity;
•
Tighten the fixing bolts and secure the loose parts;
•
Install the blade correctly;
•
Use workpieces according to the cutting capacity of
the tool;
The sliding miter saw is constantly burning the
workpiece:
•
The blade is damaged;
•
The workpiece is being pushed too fast;
•
Replace the blade;
•
Push the workpiece more slowly;
Poor cutting performance:
•
The saw blade is damaged or dirty;
•
The saw blade is not the appropriate for the
intended task;
•
The saw blade is mounted upside down;
•
Clean and replace the blade;
•
Replace the saw blade with the correct one;
•
Reinstall the saw blade correctly;