VITO PRO-POWER VIMSFL4, Инструкция по эксплуатации

Страница: 30 / 42

30
FREQUENTLY ASKED QUESTIONS / TROUBLESHOOTING
Question/ Problem – Cause
Causa
Solution
The engine doesn’t start :
•
Discharged battery;
•
Switch contacts are not in good condition or the
switch does not work;
•
Windings of the rotor or the stator damaged;
•
Windings of the rotor in short circuit;
•
Charge;
•
Repair or replace the switch;
•
Contact technical assistance;
•
Contact technical assistance;
The engine makes an abnormal sound, starts
intermittently or turns slowly:
•
Switch connections are damaged;
•
Mechanical obstruction;
•
The multi-tool is running over excessive pressure,
motor in overload;
•
Repair or replace the switch;
•
Inspect the mechanical parts;
•
Reduce the pressure exerted;
The machine overheats:
•
Machine overloaded;
•
Incorrect housing or parts assembly inside the
electrical tool;
•
Power supply too low;
•
Reduce working pressure;
•
Check if there is any blockage or part touching the
rotor;
•
Check the power voltage and adjust according to
the technical specifications;