VITO PRO POWER VIBP38A, Инструкция по эксплуатации

Страница: 27 / 40

27
FREQUENTLY ASKED QUESTIONS/ TROUBLESHOOTING
Question/Problem - Cause
Cause
Solution
The appliance does not switch on:
•
The compressor is switched off;
•
The shut-off valve is on "closed" position;
•
Switch on the compressor;
•
Open the shut-off valve;
The appliance runs irregularly:
•
The air inlet filter is clogged;
•
Clean or change the air inlet filter;
WARRANTY CERTIFICATE
The warranty of this pneumatic drill is two years from the date
of purchase. You should, therefore, keep your proof of purchase
during this period. The warranty covers any manufacturing
defect in material or operation, as well as parts and work
needed for their recovery.
Excluded from the warranty are the misuse of the product, any
repairs carried out by unauthorized individuals (outside the
service center of the brand VITO) as well as any damage caused
by the use of it.
DECLARATION OF CONFORMITY
We declare, under our sole responsibility, that the product
labelled 3/8” PNEUMATIC DRILL with code VIBP38A complies
with the following standards or normative documents: EN
11148-3:2012 , as defined by:
2006/42/EC - The Machinery Directive
S. João de Ver,
30th june 2021
Central Lobão S. A.
Technical supervisor
Hugo Santos