VITO PRO-POWER VIBCMPSFL20A, Инструкция по эксплуатации

Страница: 30 / 42

30
FREQUENTLY ASKED QUESTIONS / TROUBLESHOOTING
Question/Problem - Cause Causa Solution
The electric tool doesn’t switch on when you press
the “ON/OFF” switch:
•
Discharged battery;
•
Switch connections are not in good condition or
switch does not work;
•
Charge the battery;
•
Repair or replace the switch;
The on/off switch is blocked:
•
The forward/reverse switch is center positioned;
•
Select the direction of rotation;
Engine emits abnormal sound, starts intermittently
or rotates slowly:
•
Switch connections damaged;
•
Mechanical obstruction;
•
Electric tool is under excessive pressure, engine
overloaded;
•
Repair or replace the switch;
•
Inspect the mechanical components;
•
Reduce the pressure;
Locking sleeve overheats:
•
Lack of grease inside the locking sleeve;
•
Put grease in the fixing notches of the drill
accessory;
Body overheats:
•
Machine overloaded;
•
The housing or parts inside the brush cutter are
incorrectly assembled;
•
Reduce working pressure;
•
Check whether there is any blockage or parts
touching the blade;