Vitek VT-8250, Инструкция по эксплуатации

Страница: 7 / 40

7
ENGLISH
•
Wipe the unit body (5) with a damp cloth and then wipe
it dry.
•
Clean the air inlet grid (6) with a brush.
•
Never immerse the unit into water or other liquids.
•
Do not use abrasives and solvents to clean the unit body.
STORAGE
•
Disconnect the unit from the mains and clean it.
•
Never wind the power cord around the hot air brush,
as this can damage the cord or the unit body. Handle
the power cord with care, do not pull, twist or stretch it,
especially near the power plug or at the junction point.
Straighten the cord periodically if it gets twisted during
the hot air brush operation.
•
For easy storing there is a hanging loop (7), you can
hang the hot air styler on this loop provided that no
water gets on the unit in this position.
•
Keep the unit in a dry cool place out of reach of children
and disabled persons.
DELIVERY SET
Hot air brush – 1 pc.
Round brush (21 mm) – 1 pc.
Flat brush – 1 pc.
Nozzle – 1 pc.
Manual – 1 pc.
Warranty certificate – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50-60 Hz
Rated input power: 1200 W
ATTENTION! Do not use the unit near water in the bath-
rooms, showers, swimming pools etc.
The manufacturer preserves the right to change design,
structure and specifications not affecting general prin-
ciples of the unit operation without a preliminary notification
due to which insignificant differences between the manual