background image

VITEK

VITEK

 VTC-TNB48R4M2

VTC-TNB48R5V2

5.0 Megapixel Indoor/Outdoor 

WDR IP IR Bullet Cameras

QUICK START GUIDE

FEATURES

• Megapixel Progressive Scan CMOS image sensor
• Advanced Starlight Technology Offers Dramatically Higher 

Sensitivity to Light Producing Color Images in Very Dark & Night 

Scenes

• Up to 30fps live view
• 3.6~10mm Varifocal Lens (VTC-TNB48R5V2) / Motorized 3.3-

12mm Motorized Varifocal Lens (VTC-TNB48R4M2)

• 48 Infrared LED’s with 160’ IR Range 
• Digital Wide Dynamic Range (D-WDR)
• True Mechanical Day/Night function by ICR
• XD-DNR (2D-DNR & 3D-DNR) Noise Reduction 
• On Board Motion Detection
• H.265/H.264/MJPEG Triple Streaming
• Secondary Video Output (CVBS)
• MicroSD memory card slot for Local recording supporting up to 

128GB MicroSDXC cards

• Remote Viewing via CMS, Internet Explorer, and iOS & Android 

Apps

• Minimal Latency with up to 10 simultaneous user connections
• ONVIF Compliant
• IP66 Weather Resistance
• Optional Junction Box Mount Available (VT-TJB01)
• 12VDC & PoE (Power over Ethernet) Operation

PLEASE NOTE: 

Complete User Guide, Software, Tools, and Updates are 

available online.  Scan the QR Code or visit:

http://www.vitekcctv.com/Downloads

Содержание TRANSCENDENT VTC-TNB48R4M2









Отзывы: