Vitea Care DRVM6C, Инструкция по эксплуатации

Страница: 69 / 76

viteacare.com 69
Number
of flashes Error description
Possible action
1
Remote / joystick
error
Check cables and connectors.
Replace Remote module.
2
Network or
configuration
error
Check cables and connectors.
Check Bluetooth pairing.
Reconfigure the system.
Recharge the battery.
Check charger.
Replace modules.
Contact supplier.
3 Left motor error
Check cables and connectors.
Replace Power Module.
Check and/or replace left motor.
4 Right motor error
Check cables and connectors.
Replace Power Module.
Check and/or replace right motor
5
Left park brake
error
Check cables and connectors.
Check left park brake is released
6
Right park brake
error
Check cables and connectors.
Check right park brake is released.
7
Module error
(other than
Remote module)
Check cables and connectors.
Check modules.
Replace LiNX Access Key.
Replace Power Module.
Recharge battery.
The table below describes the error indication, and a few possible actions
that can be taken to rectify the problem. The actions listed are not in
any particular order and are suggestions only; the intention is that one
of the suggestions may help you clear the problem. If in doubt, consult
your authorized supplier.
Error codes and troubleshooting
ATTENTION!
If there is an error with the system when it is powered up, then the status
indicator will flash red; the number of flashes will indicate the type of error.
Status
indicator