Vitea Care DRVM6C, Инструкция по эксплуатации

Страница: 58 / 76

58 viteacare.com
Control panel - operation
Adjustment of wheelchair function operation
Seat function selector
Quick speed selection dial
Speed selector
The drive function can be selected using the select button
speed, which is located on the control panel below the left side
of the power button.
The seat function can be selected using the seat function switch,
which is located on the controller below the right side of the
power button.
A speed selector allows the user to limit the wheelchair’s maximum speed.
Turn the speed selector knob as far to the right as possible to set the highest
speed and follow these steps:
Minimum speed
Medium speed
Maximum speed
Control lights
Warning light/
Left turn signal button
Front light/
Right turn signal button
is set at 40% of maximum speed
is set at 70% of maximum speed
is set at 95% of maximum speed
To set the lowest speed, turn the dial as far to the left as
possible.
To set the highest speed, turn the dial as far to the right
as possible.
High
speed
Quick speed selection dial and speed selector button allow you to adjust the
speed of the wheelchair.
Low
speed