Vitea Care DRVM6C, Инструкция по эксплуатации

Страница: 53 / 76

viteacare.com 53
Clutch
The wheelchair has a clutch lever enabling to disconnect the
electric drive and push the wheelchair manually.
• If you want the electric drive to be
activated
, push the clutch
lever forward of the wheelchair.
• If you want the electric drive to be
deactivated
, pull the clutch
lever.
WARNING!
Do not deactivate the electric drive, if there is no one who could push your
wheelchair.
Do not deactivate the electric drive when the wheelchair is on an inclined
surface, as it could roll down and this could lead to serious injuries.
Remember that when the electric drive is deactivated, the electromag-
netic braking system is also deactivated.
Always stand behind the wheelchair when you are deactivating the electric
drive. Do not deactivate the electric drive when sitting on the wheelchair.
When you place your wheelchair in the desired location, remember to
activate the electric drive again.
Getting off the wheelchair
1. Stop the wheelchair completely.
2. Turn off the power o control panel
3. Carefully and safely get off the seat and take place next to the wheelchair.
WARNING!
Never attempt to get on or off the wheelchair without first removing the
key from the power switch. This prevents the product, from being moved
by accidentally switching the drive control lever.