19
IFU-26 Rev. J | December 2021
Entering Body Temperature Manually
Manual Entry
Body Temperature
--.-°
Manual Entry
Body Temperature
98.6°F
Just Now
Take Body Temperature
Fahrenheit (°F)
Celsius (°C)
Enter Temperature
Step 2
Use a clinical-grade thermometer to measure body
temperature. Enter value here and select Calibrate.
Step 1
Select Units
98.6
Enter
Select
Units
Tap Body
Temperature
Enter
Value
Your care team may direct you to enter body temperature
manually on a regular schedule (for example, one or
more times per day).
To enter body temperature manually:
1.
Measure temperature with a clinical-grade
thermometer.
2.
Tap the
Body Temperature
tile in the dashboard (if
using VistaPhone with simplified display, tap Take a
Measurement button first).
3.
Tap the units (
Celsius °C
or
Fahrenheit °F
).
4.
Enter the temperature and tap
OK
. The VistaPoint
dashboard will be updated with the new body
temperature value and will display the time since the
last manual entry.
Section 15:
Entering Body Temperature Manually
Your care team may direct you to enter an oxygen
saturation (%SpO2) reading manually on a regular
schedule (for example, one or more times per day).
This procedure is for manual entry only. If you are
performing automatic entry with a paired Bluetooth
device, refer to the procedures later in this manual.
1.
Use a pulse oximeter to measure your blood oxygen
saturation (%SpO
2
).
2.
Tap
Take SpO2
in the Oxygen Saturation tile (or tap
the
Take a Measurement
button on VistaPhone and
then
Take SpO2
).
3.
Tap
Manual Entry
(if not already selected).
4. Tap the entry field. Use the on-screen keyboard to
enter the measured value then tap
Enter
. If you make
a mistake, tap
Clear Values
to start over.
5. Confirm the entered value:
–
If the value displayed is correct, tap
Yes
.
–
If the value is not correct, tap
No, Re-enter value
and then re-enter the value.
Section 16:
Entering Oxygen Saturation Manually
Entering Oxygen Saturation Manually
Take Oxygen Saturation
Manual Entry
Use Bluetooth
SpO2 Value (0-100)
%
98
Clear Values
Enter
Enter
Value
Tap
Take SpO2
or
Take a Measurement
Confirm Entered Value
Take SPO2
