7737 User Guide
© 2021 Vital Systems, Inc.
4
www.vitalsystem.com
VSI Device Manager Setup
The Integra J8 and J7 as well as DSPMC J11 and J12 expansion headers must be enabled for 7737
step/dir before use. To do this, open the VSI Device Manager and scan the network for your device.
Once the device is found and selected, open the HiCON or DSPMC tab, highlight the desired expansion
port and mark the value for the Enabled option. Press the Download button to send the changes to the
device. If you are only using one 7737 board, make sure to only enable one expansion header. If you
enable both headers and only one 7737 board is plugged, it will be permanently stuck in estop
condition.