XSB42 42" Stall Bar Assembly Guide
{'
Please read this guide thoroughly before beginning
assembly and follow each process step by step.
Note: Some steps may require two people.
Tools required for assembly and installation:
3/16" Allen Hex Wrench (included)
1 /2" Wrench or Socket Wrench
Tape Measure
Drill with 7/32" Wood Bit (for wood backer board installation)
Hammer Drill with 1/2" Masonry Bit (for concrete, block, brick installation)
concrete anchors not included.
Stud Finder (if needed)
Two Wood Backer Boards and Hardware (for sheetrock wall installation)
VSB36-1
Содержание XSB42
Страница 3: ......
