Ejector Sleeve
Nozzle
Keypad
Body
Tip Eject Button
Adjustable Hook
Pipetting Trigger
LCD Display
Recharging Port
Volume Label
Electronic models are
supplied with an
Ovation power supply
unit for recharging the
pipette's battery. Use
of other power supply
units can damage the
pipette and invalidate
the warranty.
Refer to the Operator's Guide at
www.vistalab.com/support/electronic-
single-channel/ for complete instructions.
Quick Reference Guide
for
ESC
Electronic
Single Channel Pipettes
Ergonomic Handling
1.
"Shake hands" position to pick
up. Allow body to fill your
palm.
2.
Rotate adjustable hook to rest
comfortably on your forefinger.
3.
Keep hand posture relaxed.
Installing the "Click" Tip
Using your Ovation pipette
1.
Insert nozzle into tip.
2.
Lightly press down until a
“click” is heard. This indicates
the tip is securely sealed onto
the nozzle
Ovation pipette
display
Charging
your Ovation pipette
Recharge battery approximately 90 minutes prior to use.
Go to www.vistalab.com to activate warranty.
WARNING!
Only connect power supply
to a compatible power source. Use of an
incompatible power source can cause
shock and fire hazard. Use only the power
supply provided by VistaLab
Technologies. Use of other power
supplies can damage the pipette and
invalidate warranty. Unplug power supply
before cleaning exterior.
po
Icon indicates the
remaining battery
capacity.
Symbol indicates the
next action to be
performed: aspirate (up)
and dispense (down).
Displays volume and
values during set-up,
e.g. # of mix cycles, #
of multiple dispenses.
Displayed when cal factor
has been changed from
factor setting of 1.000.
Displays liquid handling
function, setting, or
prompt that is active.
